calculateppi.com
English
English

Retroid Pocket 4 Pro — 325.6 PPI

The Retroid Pocket 4 Pro retro gaming handheld features a 4.7-inch 750 × 1334 IPS touchscreen at 326 PPI.

325.6
PPI
Ultra High Density

At 326 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
1334 × 750
Screen size
4.7″
Aspect ratio
1.78:1
Dot pitch
0.078 mm
Total pixels
1,000,500 px
Megapixels
1.00 MP
Retina estimate
Yes ✓
Min. view distance
10.6″ / 26.8 cm
Released
2024

How sharp is the Retroid Pocket 4 Pro display?

The handheld panel measures 325.6 PPI from its1,334 × 750 resolution across a 4.7″ diagonal.At a typical handheld viewing distance of 12–16 inches (30–40 cm), individual pixels become indistinguishable beyond roughly 10.6″ / 26.8 cm — the 20/20 visual-acuity limit for this density. At 325.6 PPI, the panel is comfortably in Retina-class territory for its use case.

At 326 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Retroid Pocket 4 Pro vs the handheld lineup

Across the 12 handhelds in this database, the average pixel density is281.7 PPI. The Retroid Pocket 4 Pro sits at 325.6 PPI —43.9 PPI above the category average, sharper than 75% of its peers.

For context outside the handheld class: 325.6 PPI is about 1.5× the density of the 27" 5K Monitor reference display (217.6 PPI).

Compare with similar handhelds

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal