calculateppi.com
English
English

Lenovo Legion Go — 343.1 PPI

The Lenovo Legion Go features a large 8.8-inch QHD+ (2560 × 1600) 144Hz IPS display at 343 PPI.

343.1
PPI
Ultra High Density

At 343 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
2560 × 1600
Screen size
8.8″
Aspect ratio
8:5
Dot pitch
0.074 mm
Total pixels
4,096,000 px
Megapixels
4.10 MP
Retina estimate
Yes ✓
Min. view distance
10.0″ / 25.5 cm
Released
2023

How sharp is the Lenovo Legion Go display?

The handheld panel measures 343.1 PPI from its2,560 × 1,600 resolution across a 8.8″ diagonal.At a typical handheld viewing distance of 12–16 inches (30–40 cm), individual pixels become indistinguishable beyond roughly 10.0″ / 25.5 cm — the 20/20 visual-acuity limit for this density. At 343.1 PPI, the panel is comfortably in Retina-class territory for its use case.

At 343 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Lenovo Legion Go vs the handheld lineup

Across the 12 handhelds in this database, the average pixel density is281.7 PPI. The Lenovo Legion Go sits at 343.1 PPI —61.3 PPI above the category average, sharper than 83% of its peers.

For context outside the handheld class: 343.1 PPI is about 1.6× the density of the 27" 5K Monitor reference display (217.6 PPI).

Head-to-head display comparisons

More Lenovo devices

Compare with similar handhelds

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal