calculateppi.com
English
English

Ayaneo KUN — 359.4 PPI

The Ayaneo KUN premium gaming handheld features an 8.4-inch 1600p IPS display at 2560 × 1600 pixels with 359 PPI.

359.4
PPI
Retina-class

At 359 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
2560 × 1600
Screen size
8.4″
Aspect ratio
8:5
Dot pitch
0.071 mm
Total pixels
4,096,000 px
Megapixels
4.10 MP
Retina estimate
Yes ✓
Min. view distance
9.6″ / 24.3 cm
Released
2023

How sharp is the Ayaneo KUN display?

The handheld panel measures 359.4 PPI from its2,560 × 1,600 resolution across a 8.4″ diagonal.At a typical handheld viewing distance of 12–16 inches (30–40 cm), individual pixels become indistinguishable beyond roughly 9.6″ / 24.3 cm — the 20/20 visual-acuity limit for this density. At 359.4 PPI, the panel is comfortably in Retina-class territory for its use case.

At 359 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Ayaneo KUN vs the handheld lineup

Across the 12 handhelds in this database, the average pixel density is281.7 PPI. The Ayaneo KUN sits at 359.4 PPI —77.7 PPI above the category average, sharper than 92% of its peers.

For context outside the handheld class: 359.4 PPI is about 1.7× the density of the 27" 5K Monitor reference display (217.6 PPI).

Compare with similar handhelds

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal