calculateppi.com
English
English

MSI Claw — 314.7 PPI

The MSI Claw A1M features a 7.0-inch Full HD 120Hz IPS touchscreen display at 1920 × 1080 pixels with 315 PPI.

314.7
PPI
Ultra High Density

At 315 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
1920 × 1080
Screen size
7″
Aspect ratio
16:9
Dot pitch
0.081 mm
Total pixels
2,073,600 px
Megapixels
2.07 MP
Retina estimate
Yes ✓
Min. view distance
10.9″ / 27.7 cm
Released
2024

How sharp is the MSI Claw display?

The handheld panel measures 314.7 PPI from its1,920 × 1,080 resolution across a 7″ diagonal.At a typical handheld viewing distance of 12–16 inches (30–40 cm), individual pixels become indistinguishable beyond roughly 10.9″ / 27.7 cm — the 20/20 visual-acuity limit for this density. At 314.7 PPI, the panel is comfortably in Retina-class territory for its use case.

At 315 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

MSI Claw vs the handheld lineup

Across the 12 handhelds in this database, the average pixel density is281.7 PPI. The MSI Claw sits at 314.7 PPI —33.0 PPI above the category average, sharper than 50% of its peers.

For context outside the handheld class: 314.7 PPI is about 1.4× the density of the 27" 5K Monitor reference display (217.6 PPI).

Compare with similar handhelds

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal