calculateppi.com
English
English

Sony Xperia 1 VI — 396.5 PPI

The Sony Xperia 1 VI features a 6.5-inch 19.5:9 FHD+ LTPO OLED display with 1080 × 2340 pixels.

396.5
PPI
Retina-class

At 396 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
1080 × 2340
Screen size
6.5″
Aspect ratio
6:13
Dot pitch
0.064 mm
Total pixels
2,527,200 px
Megapixels
2.53 MP
Retina estimate
Yes ✓
Min. view distance
8.7″ / 22.0 cm
Released
2024

How sharp is the Sony Xperia 1 VI display?

The phone panel measures 396.5 PPI from its1,080 × 2,340 resolution across a 6.5″ diagonal.At a typical phone viewing distance of 10–14 inches (25–35 cm), individual pixels become indistinguishable beyond roughly 8.7″ / 22.0 cm — the 20/20 visual-acuity limit for this density. At 396.5 PPI, the panel is comfortably in Retina-class territory for its use case.

At 396 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Sony Xperia 1 VI vs the phone lineup

Across the 71 phones in this database, the average pixel density is447.1 PPI. The Sony Xperia 1 VI sits at 396.5 PPI —50.6 PPI below the category average, sharper than 17% of its peers.

For context outside the phone class: 396.5 PPI is about 1.8× the density of the 27" 5K Monitor reference display (217.6 PPI).

More Sony devices

Compare with similar phones

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal