calculateppi.com
English
English

Motorola Razr 50 Ultra — 413.4 PPI

The Motorola Razr 50 Ultra features a 6.9-inch 165Hz LTPO OLED folding display at 1080 × 2640 pixels.

413.4
PPI
Retina-class

At 413 PPI, this is an exceptionally high pixel density. Well beyond the perceptual limit for most viewing scenarios. Common on flagship phones where manufacturers prioritize display specifications.

Resolution
1080 × 2640
Screen size
6.9″
Aspect ratio
9:22
Dot pitch
0.061 mm
Total pixels
2,851,200 px
Megapixels
2.85 MP
Retina estimate
Yes ✓
Min. view distance
8.3″ / 21.1 cm
Released
2024

How sharp is the Motorola Razr 50 Ultra display?

The phone panel measures 413.4 PPI from its1,080 × 2,640 resolution across a 6.9″ diagonal.At a typical phone viewing distance of 10–14 inches (25–35 cm), individual pixels become indistinguishable beyond roughly 8.3″ / 21.1 cm — the 20/20 visual-acuity limit for this density. At 413.4 PPI, the panel is comfortably in Retina-class territory for its use case.

At 413 PPI, this is an exceptionally high pixel density. Well beyond the perceptual limit for most viewing scenarios. Common on flagship phones where manufacturers prioritize display specifications.

Motorola Razr 50 Ultra vs the phone lineup

Across the 71 phones in this database, the average pixel density is447.1 PPI. The Motorola Razr 50 Ultra sits at 413.4 PPI —33.7 PPI below the category average, sharper than 21% of its peers.

For context outside the phone class: 413.4 PPI is about 1.9× the density of the 27" 5K Monitor reference display (217.6 PPI).

Compare with similar phones

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal