calculateppi.com
English
English

Galaxy A55 5G — 390.5 PPI

The Galaxy A55 5G features a 6.6-inch Super AMOLED 120Hz display at 1080 × 2340 pixels.

390.5
PPI
Retina-class

At 390 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
1080 × 2340
Screen size
6.6″
Aspect ratio
6:13
Dot pitch
0.065 mm
Total pixels
2,527,200 px
Megapixels
2.53 MP
Retina estimate
Yes ✓
Min. view distance
8.8″ / 22.4 cm
Released
2024

How sharp is the Galaxy A55 5G display?

The phone panel measures 390.5 PPI from its1,080 × 2,340 resolution across a 6.6″ diagonal.At a typical phone viewing distance of 10–14 inches (25–35 cm), individual pixels become indistinguishable beyond roughly 8.8″ / 22.4 cm — the 20/20 visual-acuity limit for this density. At 390.5 PPI, the panel is comfortably in Retina-class territory for its use case.

At 390 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Galaxy A55 5G vs the phone lineup

Across the 71 phones in this database, the average pixel density is447.1 PPI. The Galaxy A55 5G sits at 390.5 PPI —56.6 PPI below the category average, sharper than 10% of its peers.

For context outside the phone class: 390.5 PPI is about 1.8× the density of the 27" 5K Monitor reference display (217.6 PPI).

More Samsung devices

Compare with similar phones

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal