calculateppi.com
English
English

Asus Zenfone 11 Ultra — 388.2 PPI

The Asus Zenfone 11 Ultra features a 6.78-inch 144Hz LTPO AMOLED display at 1080 × 2400 pixels with 388 PPI.

388.2
PPI
Retina-class

At 388 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
1080 × 2400
Screen size
6.78″
Aspect ratio
9:20
Dot pitch
0.065 mm
Total pixels
2,592,000 px
Megapixels
2.59 MP
Retina estimate
Yes ✓
Min. view distance
8.9″ / 22.5 cm
Released
2024

How sharp is the Asus Zenfone 11 Ultra display?

The phone panel measures 388.2 PPI from its1,080 × 2,400 resolution across a 6.78″ diagonal.At a typical phone viewing distance of 10–14 inches (25–35 cm), individual pixels become indistinguishable beyond roughly 8.9″ / 22.5 cm — the 20/20 visual-acuity limit for this density. At 388.2 PPI, the panel is comfortably in Retina-class territory for its use case.

At 388 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Asus Zenfone 11 Ultra vs the phone lineup

Across the 71 phones in this database, the average pixel density is447.1 PPI. The Asus Zenfone 11 Ultra sits at 388.2 PPI —58.9 PPI below the category average, sharper than 7% of its peers.

For context outside the phone class: 388.2 PPI is about 1.8× the density of the 27" 5K Monitor reference display (217.6 PPI).

More Asus devices

Compare with similar phones

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal