calculateppi.com
English
English

OnePlus Open — 426.0 PPI

The OnePlus Open main folding screen is a 7.82-inch 120Hz Flexi-fluid LTPO3 OLED display at 2268 × 2440 pixels with 426 PPI.

426.0
PPI
Retina-class

At 426 PPI, this is an exceptionally high pixel density. Well beyond the perceptual limit for most viewing scenarios. Common on flagship phones where manufacturers prioritize display specifications.

Resolution
2268 × 2440
Screen size
7.82″
Aspect ratio
0.93:1
Dot pitch
0.060 mm
Total pixels
5,533,920 px
Megapixels
5.53 MP
Retina estimate
Yes ✓
Min. view distance
8.1″ / 20.5 cm
Released
2023

How sharp is the OnePlus Open display?

The phone panel measures 426.0 PPI from its2,268 × 2,440 resolution across a 7.82″ diagonal.At a typical phone viewing distance of 10–14 inches (25–35 cm), individual pixels become indistinguishable beyond roughly 8.1″ / 20.5 cm — the 20/20 visual-acuity limit for this density. At 426.0 PPI, the panel is comfortably in Retina-class territory for its use case.

At 426 PPI, this is an exceptionally high pixel density. Well beyond the perceptual limit for most viewing scenarios. Common on flagship phones where manufacturers prioritize display specifications.

OnePlus Open vs the phone lineup

Across the 71 phones in this database, the average pixel density is447.1 PPI. The OnePlus Open sits at 426.0 PPI —21.1 PPI below the category average, sharper than 32% of its peers.

For context outside the phone class: 426.0 PPI is about 2.0× the density of the 27" 5K Monitor reference display (217.6 PPI).

More OnePlus devices

Compare with similar phones

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal