calculateppi.com
English
English

Galaxy Z Flip7 (Cover) — 305.4 PPI

The Galaxy Z Flip7 cover display features a 3.4-inch Super AMOLED FlexWindow at 720 × 748 pixels with 306 PPI.

305.4
PPI
Ultra High Density

At 305 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Resolution
720 × 748
Screen size
3.4″
Aspect ratio
0.96:1
Dot pitch
0.083 mm
Total pixels
538,560 px
Megapixels
0.54 MP
Retina estimate
Yes ✓
Min. view distance
11.3″ / 28.6 cm
Released
2025

How sharp is the Galaxy Z Flip7 (Cover) display?

The phone panel measures 305.4 PPI from its720 × 748 resolution across a 3.4″ diagonal.At a typical phone viewing distance of 10–14 inches (25–35 cm), individual pixels become indistinguishable beyond roughly 11.3″ / 28.6 cm — the 20/20 visual-acuity limit for this density. At 305.4 PPI, the panel is comfortably in Retina-class territory for its use case.

At 305 PPI, this exceeds the ~300 PPI threshold where individual pixels become imperceptible at hand-held distance. This is Retina-class density — sharp enough that increasing PPI further yields diminishing visible returns.

Galaxy Z Flip7 (Cover) vs the phone lineup

Across the 71 phones in this database, the average pixel density is447.1 PPI. The Galaxy Z Flip7 (Cover) sits at 305.4 PPI —141.8 PPI below the category average and the lowest-density panel in its class.

For context outside the phone class: 305.4 PPI is about 1.4× the density of the 27" 5K Monitor reference display (217.6 PPI).

More Samsung devices

Compare with similar phones

Calculate any screen's PPI

PPI Calculator

√(W² + H²) ÷ size | PPI ±0.1
Resolution Presets
Device Presets
Screen size
in
Use the diagonal printed on the box or spec sheet.
—
PPI
—

Retina estimate
—
Dot pitch
—
Total pixels
—
Megapixels
—
Aspect ratio
—
Min. distance
—
StandardHighUltra HighRetina

See the pixel density

—

Higher PPI packs more pixels into the same physical area, producing smaller pixels and finer detail.

Relative Pixel Size:—
Simulated Dot Pitch:—
PPI = √(W² + H²) ÷ diagonal